Hallo,
Seit ein paar Tagen habe ich meinen Brenner unter woody zum Brennen zu
bewegen versucht.
Hier ein kurzer Zusammenschnitt meiner Irrungen:
carol:~# lsmod
Module Size Used by
parport_pc 7296 1 (autoclean)
lp 4384 0 (autoclean)
aha152x 25216 0
sg 11712 0
st 24360 0 (unused)
ide-scsi 7360 0
ne 6304 1
8390 6088 0 [ne]
carol:~# cdrecord -scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 2.1.40
Using libscg version 'schily-0.5'
scsibus0:
0,0,0 0) 'SONY ' 'CD-RW CRX140E ' '1.0c' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) *
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) 'HP ' 'C1533A ' '9503' Removable Tape
1,5,0 105) *
1,6,0 106) ' ' 'Scanner 600A4 ' '2.21' Scanner
1,7,0 107) *
carol:~# cdrecord -v -toc
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.40
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX140E '
Revision : '1.0c'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 4183808 = 4085 KB
Current Secsize: 2048
ATIP start of lead out: 1166730 (03:18/30)
first: 1 last 1
track: 1 lba: 0 ( 0) 00:02:00 adr: 1 control: 4 mode: 1
track:lout lba: 277663 ( 1110652) 61:44:13 adr: 1 control: 4 mode:
-1
######### Verschiedene Versuche mit Image in /tmp bzw. 1:1-copy :
carol:~# cdrecord -v dev=0,0,0 -speed=8 -isosize /dev/hdd
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
cdrecord: Invalid argument. Cannot get mmap for 1052672 Bytes on
/dev/zero.
carol:~# mount /cdrom
carol:~# cdrecord -v dev=0,0,0 -speed=8 -isosize /cdrom
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
cdrecord: Invalid argument. Cannot get mmap for 1052672 Bytes on
/dev/zero.
carol:~# cdrecord -v dev=0,0,0 -speed=8 /dev/hdd
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
cdrecord: Invalid argument. Cannot get mmap for 1052672 Bytes on
/dev/zero.
carol:~# cdrecord -v dev=0,0,0 -speed=8 /cdrom
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
cdrecord: Invalid argument. Cannot get mmap for 1052672 Bytes on
/dev/zero.
carol:~# cdrecord -v dev=0,0,0 -speed=8 -isosize /tmp/cdimage
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
cdrecord: Invalid argument. Cannot get mmap for 1052672 Bytes on
/dev/zero.
########## Dann habe ich mir ein neues Packet geholt:
Get:1 http://ftp.de.debian.org woody/main cdrecord 4:1.10-2.3 [305kB]
Fetched 305kB in 6s (45.9kB/s)
Preconfiguring packages ...
Selecting previously deselected package cdrecord.
(Reading database ... 65466 files and directories currently installed.)
Unpacking cdrecord (from .../cdrecord_4%3a1.10-2.3_i386.deb) ...
You are running a 2.2.20 kernel, but it turns out that the cdrecord
package was compiled under a 2.4.x kernel. You will need to either
upgrade to a 2.4.x kernel, or recompile the cdrecord package using your
current 2.2.20 kernel. If you wish to recompile cdrecord, then you
should be able to type the following:
apt-get update && apt-get build-dep cdrecord && apt-get source -b
cdrecord
and (assuming your system is set up properly), your system should
recompile cdrecord for you. Then you can do a
dpkg -i cdrecord-<version>.<arch>.deb
and your cdrecord package should actually work (and you shouldn't see
this message anymore).
Setting up cdrecord (1.10-2.3) ...
####### Aha, also alles in die Tonne und her mit den alten CD's von
Schlittermann
####### und ab geht die Post ...
carol:~# cdrecord -v speed=8 dev=0,0,0 -audio track*.cdda.wav
Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX140E '
Revision : '1.0c'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 4183808 = 4085 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 34 MB (03:26.36) no preemp
.....
Track 20: audio 36 MB (03:34.37) no preemp
Total size: 741 MB (73:25.60) = 330420 sectors
Lout start: 741 MB (73:27/45) = 330420 sectors
Current Secsize: -1
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
ATIP start of lead in: -11989 (97:22/11)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 53
Manufacturer: Seantram Technology Inc.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 29429
Starting to write CD/DVD at speed 8 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 34 of 34 MB written (fifo 100%).
Track 01: Total bytes read/written: 36401904/36401904 (15477 sectors).
...
Starting new track at sector: 314380
Track 20: 36 of 36 MB written (fifo 100%).
Track 20: Total bytes read/written: 37815456/37815456 (16078 sectors).
Writing time: 612.704s
Fixating...
Fixating time: 32.954s
cdrecord: fifo had 25206 puts and 25206 gets.
cdrecord: fifo was 0 times empty and 17018 times full, min fill was 96%.
carol:~#
###### Ende gut, alles gut?
###### Manchmal ist Rückschritt ein Fortschritt ...
Fazit: Der Bugreport spricht die Wahrheit!
-- Gruß Ralf Springwald
This archive was generated by hypermail 2.1.3 : Tue Jan 22 2002 - 23:52:28 CET