I'm running LM8.1 and trying to set up as remote syslog server for my Cisco.
I've read all the doc's and run syslogd in debug mode. Checked syslog.conf,
.../init.d/syslog, etc. All are configured properly. My installed version is
`sysklogd-1.4-12mdk.rpm' The output from debug is:
(no workie)
Successful select, descriptor count = 1, Activity on: 26 Message from inetd
socket: #26, host: 9.139.4.8 INET socket error: 11 = Resource temporarily
unavailable. Called logerr, msg: recvfrom inet logmsg: syslog.err<43>, flags
4, from msglog, msg syslogd: recvfrom inet: Resource temporarily unavailable
Called fprintlog, logging to FILE /var/log/messages Listening on syslog UDP
port. Calling select, active file descriptors (max 26): 3 26 Select
interrupted.
When I do the same on a RH7.1 syslog server I get:
(works)
Successful select, descriptor count = 1, Activity on: 10 Message from inetd
socket: #10, host: 192.168.1.9 Host name for your address (192.168.1.9)
unknown. Message length: 93, File descriptor: 10. logmsg:
local7.notice<189>, flags 2, from 192.168.1.9, msg 2133: *Sep 29 13:50:35:
%SYS-5-CONFIG_I: Configured from console by vty0 (192.168.1.5) Called
fprintlog, logging to FILE /var/log/messages Called fprintlog, logging to
FILE /var/log/boot.log Listening on syslog UDP port. Calling select, active
file descriptors (max 10): 3 10
Any suggestions? I really need to get this going asap. Pardon my ignorance
if I've missed the obvious.
Thanks for your help!
Don
dirvin@martinsprocket.com
This archive was generated by hypermail 2.1.3 : Tue Jan 15 2002 - 23:00:39 CET